All Products

Pin-Retaining 1

Steel pin-retaining component measuring 1" OD by 3-3/8" L, designed to secure hydraulic cylinder connection points and moving assemblies. Provides reliable retention under load while allowing proper movement where required. Used on both Inverters and PSR's.

Rubber Buffer (Set of 2)

Set of two rubber buffers designed for use on inverters pre-2022. These buffers help absorb shock, reduce vibration, and protect both equipment and operators during operation and load transfer.

Black Push Button

Durable black push button designed for industrial control panels and operator interfaces. Built for frequent use, it provides reliable actuation and clear tactile feedback in demanding production and material-handling environments. Push Button Assembly, Retriever Pedestal: Consists of (1) each Black Mushroom Button, Black Mushroom Plate, NO Contact, NC Contact, Legend Holder, Custom Legend

Rexroth Hand Lever

Replacement hand lever used for manual control of hydraulic or mechanical functions. Includes handle, knob, lever box and mounting bolts. Used on pre-2019 lever controlled PSR machines.

ACM Bushing for Hinge Pin 1-1/2

Bushing designed to fit 1-1/2 OD inch hinge pins, providing a durable wear surface that reduces friction and extends the life of hinged assemblies. For use with PSR-73, PSR-90, PSR-96, PSR-100, PSR-104, PSR-110, PSR-116 and PSR-118. Please refer to the owner's manual for quantity required.

Bearing Spherical

The 50555 Spherical Bearing is a 1-inch ID, press-fit bearing designed for the lower connection point between the hydraulic cylinder and the base frame. Engineered for smooth pivoting and long service life, it provides reliable load support in demanding material-handling applications. For use with PSR-73, PSR-90, PSR-96, PSR-100, PSR-104, PSR-110, PSR-116 and PSR-118.Note: Some equipment models require two (2) bearings; please consult your owner’s manual to confirm the correct quantity.

FARO Bearing 88.4 mm with mounting plate

88.4 mm combination bearing supplied with an integrated mounting plate for secure installation. Designed to support rotational loads while maintaining alignment. Used on the DC and GL model Pallet Inverters. Check the owners manual for quantity required.

Rexroth Hand Lever Valve

Rexroth directional control valve assembly with hand lever actuation. Commonly used in hydraulic systems where manual control is required. Includes hand lever, knob, lever box and valve body. Used on pre-2019 PSR machines.

ACM Wear Pad

ACM wear pad designed to protect contact surfaces from abrasion and repetitive impact. Helps reduce metal-to-metal wear, extending the service life of rack components. Used on the SC, DC and GL model Pallet Inverter. Standard Composite wear pad, 3.8"x1.9"x0.5."

AW32 Hydraulic Oil- 5 Gallon Pail

AW32 hydraulic oil supplied in a 5-gallon pail, formulated for reliable performance in retrievers and low-temperature inverter applications. Provides consistent lubrication, corrosion protection, and smooth hydraulic operation in cold or variable environments.

Relay and Base

The RIF-1-RPT-LDP-24DC/2x21 is a compact relay contact and base assembly designed for reliable control performance in industrial automation and machinery applications. This 24 VDC unit features a dual-pole (2x21) configuration, LED status indication, and a robust socketed base for secure installation and quick replacement. Direct replacement for part number RIF-1-RSC-LDP-24DC/2X21

Cotter Pins 1/4

Set of cotter pins measuring 1/4 inch by 1-1/2 inches, used to secure pins, shafts, and fasteners in place. A simple but critical component for preventing loosening in moving or load-bearing assemblies.

White Illuminated Pushbutton Assembly

Durable push button designed for industrial control panels and operator interfaces. Built for frequent use, it provides reliable actuation and clear tactile feedback in demanding production and material-handling environments. Illuminates to show operation of function on Inverter pendant. Assembly contains 22.5mm button, N.O. Contact, 24VDC LED Module and name plate holder.

Modified Sump Strainer Filter

Modified sump strainer filter rated at 3 GPM with 100-mesh filtration and a 3-PSI bypass. Designed for older inverter systems, this filter helps protect hydraulic components by capturing debris while maintaining proper flow.

Hydac Return Filter Housing with Replacement

The RFMBN/HC75BD10A1.0/12T is a high-efficiency return-line filter assembly engineered for hydraulic systems requiring reliable fluid cleanliness and protection of sensitive components. Featuring a durable housing, a HC75BD10A1.0 high-capacity filter element, and a 12T connection configuration. Direct replacement for RFMBN/HC75BD10A

Contact, NC

Normally closed (NC) contact block used in control circuits and operator stations. Provides reliable electrical continuity and is commonly paired with push buttons or selector switches in industrial control panels.

Hinge Pin 8-3/4

Heavy-duty hinge pin measuring 1-1/2 inches by 8-3/4 inches, used in pivot points and hinged assemblies. Built to handle high loads and repeated motion in pallet inverters and similar industrial equipment. Pin w/o a grease fitting at the end of the cylinder. Should be sold as set with 50996.

N/O Prox Sensor

Balluff normally open proximity sensor designed for non-contact detection of metal objects. Used in automation and material-handling systems to provide reliable position and presence sensing in harsh industrial environments.

Eaton Motor Protector

Eaton motor protector designed to safeguard motors from overload and electrical faults. Helps prevent downtime and equipment damage by providing reliable motor protection in industrial and material-handling applications. Verify application by contacting the Parts and Service department.

Compression Spring

Compression Spring: 8"L x 3.15, Compression Spring: 8"L x 3.156" OD x 3/8" wire (PD-4500 & 9000 Pallet Dispenser)

40 x 48 RACX HD Smooth Top Rackable Pallet - Green

The PNHD1112-3RNR-138 smooth top stackable pallet uses injection-molded, high-density polyethylene to provide the sturdy strength. The single-piece, smooth-top construction is easy to clean and accommodated four-way pallet jack and forklift entry. Dimensions: 40" W x 48" L x 6.2" H.

40 x 48 RACX HD Smooth Top Rackable Pallet - Yellow

The PNHD1112-3RNR-101 smooth top stackable pallet uses injection-molded, high-density polyethylene to provide the sturdy strength. The single-piece, smooth-top construction is easy to clean and accommodated four-way pallet jack and forklift entry. Dimensions: 40" W x 48" L x 6.2" H.

40 x 48 RACX HD Smooth Top Rackable Pallet - Blue

The PNHD1112-3RNR-100 smooth top stackable pallet uses injection-molded, high-density polyethylene to provide the sturdy strength. The single-piece, smooth-top construction is easy to clean and accommodated four-way pallet jack and forklift entry. Dimensions: 40" W x 48" L x 6.2" H.

40 x 48 RACX HD Smooth Top Rackable Pallet - Gray

The PNHD1112-3RNR-104 smooth top stackable pallet uses injection-molded, high-density polyethylene to provide the sturdy strength. The single-piece, smooth-top construction is easy to clean and accommodated four-way pallet jack and forklift entry. Dimensions: 40" W x 48" L x 6.2" H.

40 x 48 RACX Medium Duty Stackable Pallet - Green

This durable, lightweight one-piece pallet delivers reliable performance and cost efficiency. Its picture-frame base with four-way runners supports space-saving elevated racking. Designed for strength, it handles full static loads when stacked and is ideal for racking with wire decking support, transport, floor storage, and automated systems.

40 x 48 RACX Medium Duty Stackable Pallet - Red

This durable, lightweight one-piece pallet delivers reliable performance and cost efficiency. Its picture-frame base with four-way runners supports space-saving elevated racking. Designed for strength, it handles full static loads when stacked and is ideal for racking with wire decking support, transport, floor storage, and automated systems.

40 x 48 RACX Medium Duty Stackable Pallet - Blue

This durable, lightweight one-piece pallet delivers reliable performance and cost efficiency. Its picture-frame base with four-way runners supports space-saving elevated racking. Designed for strength, it handles full static loads when stacked and is ideal for racking with wire decking support, transport, floor storage, and automated systems.

40 x 48 RACX Medium Duty Stackable Pallet - Black recycled material

This durable, lightweight one-piece pallet delivers reliable performance and cost efficiency. Its picture-frame base with four-way runners supports space-saving elevated racking. Designed for strength, it handles full static loads when stacked and is ideal for racking with wire decking support, transport, floor storage, and automated systems.

Mark 1 Poly Roller Skids

Make moving pallets, crates and more simple with the Mark 1 poly roller skids. These skids offer an individual capacity of 2,500 pounds and a non-marring polyurethane roller to keep your floors undamaged.

Mark 1 Steel Roller Skids

MultiRoll Mark 1S Machinery Skate has a 2,500 lb. individual load capacity and is 9" L x 5" W x 4½" H. Made in USA. Please note: Load capacity ratings are based on the transportation of loads over level surfaces.